3158

GY36 Wireless Ethernet Gateway

NuWave’s GY36 Ethernet Gateway collects and coordinates all the information from the NuWave Sensor units deployed in the vicinity of the device. The device temporarily buffers the local sensor data before interfacing through existing Ethernet networks for WAN connectivity to NuWave’s centralised cloud server. If the availability of an Ethernet network is limited or restricted, NuWave can supply an optional Ethernet to Cellular converter to allow customers to get their units online regardless of local internal network restrictions.

Compatible Products

  • LumAir LU45 Microbial Detection Sensor
  • TD40 Particle Counter
  • WB55 Particle & CO2 Sensor
  • QA20 PPB VOC Sensor
  • QA15 IAQ Sensor

GY36 Features

GY36-features

Using the product 

The GY36 unit powers on when plugged into the AC/DC adapter supplied with the product. When the device is connected to a DHCP enabled Ethernet port it will connect to the NuWave cloud server automatically. Each unit is preconfigured to operate as the host of a private and secure ZigBee network between the sensor modules and the GY36 gateway. Should the user need to configure the gateway settings, the unit is accessible though on online interface running on a webserver inside the device. This will allow users to change network settings, alter transmission intervals, update the firmware etc.

Specifications
Performance

Range Indoor range up to 30m Outdoor range 100m
Antenna 2.4GH. 3dB Antenna ariel w/ SMA male Height 107mm
Ethernet RJ45 10/100


Environment

Temperature range Operating Temperature °C 0 to 85°C
Humidity range % RH continuous, non-condensing 5 to 95%
Enclosure IP rating at proper indoor installation IP30
Weight Enclosure weight excluding adapters 175g
Certification & Compliance


Inputs and Outputs

Input 100-240V International Adapter DC 12V /- 10%, 420mA (Supplied)
Gateway Power 55mA @20V
Wireless Outputs ZigBee, 3G/4G (Optional) Gateway (supplied), Dongle 30/4G (optional)
Category: